it-Stick

Article contents

1. Overview
2. Key features
3. Who's it for?
4. What's in the box?
5. Setting up (step-by-step)
6. Using the joystick
7. Options and adjustments (Mouse mode only)
8. Compatibility and connections
9. Battery charging
10. Mounting the it-Stick
11. Troubleshooting
12. Downloadable resources
13. Warranty

1. Overview

The it-Stick (also known as the SimplyWorks Joystick) is a wireless assistive joystick from Pretorian's 'SimplyWorks' range. It is designed for users who require cursor control, yet benefit from greater freedom of movement or shared-environment use. With a wireless range of over 10 metres, it’s ideal for settings such as classrooms, group sessions, or wheelchair/table-mount access where cable management and flexibility matter.

Important: The it-Stick requires an it-Receive. The it-Receive is a USB wireless receiver which forms the hub of the SimplyWorks system. It can be used with up to six devices from the SimplyWorks range concurrently (e.g. joystick, switch and keyboard). If you don't already have an it-Receive, these two devices can be purchased as a bundle - please see the it-Stick Starter Pack.

2. Key features

• Integrated rechargeable lithium battery with USB charging cable
• Light touch joystick movement (0.5 Newtons).
• Low profile providing a natural hand rest for comfortable operation.
• Four cursor speed settings.
• Left/Right and Drag Lock buttons
• Colour coded buttons mounted sub-flush to prevent accidental activation.
• Trackball sockets to operate Left/Right click buttons from remote switches
• Easy ‘plug and play’ installation (no additional drivers required)

3. Who's it for?

• Learners who find a standard mouse difficult to use
• People with limited strength or fine motor control
• Schools, colleges, homes, and therapy settings
• Users who need wireless access for flexibility and positioning

4. What's in the box?

• SimplyWorks Joystick
• USB charging cable (USB‑A to mini‑USB)
• T‑bar handle
• Soft ball handle
• Manufacturer manual

5. Setting up (step-by-step)

1. Turn the joystick upside down and remove the cover using a screwdriver.
2. Place the joystick within 1 metre of the SimplyWorks receiver.
3. Press the Pair button on the receiver.
   
   • The Pair LED on the receiver will flash slowly.
4. Within 10 seconds, press the Pair button inside the joystick.
5. Wait until the receiver LED lights steadily for about 5 seconds.
6. Replace the cover and secure it with the screwdriver.

6. Using the joystick

In mouse mode:

• Moving the joystick moves the cursor
• Buttons act as mouse buttons
• Cursor speed and button behaviour can be adjusted

You can switch the joystick to gaming mode:

1. Press and hold the red and yellow buttons together.
2. Keep holding for around 10 seconds.
3. Release when you hear a beep.

• The joystick behaves like a game controller stick
• It can act as a left or right stick (PC gaming)
• Settings such as cursor speed do not apply

7. Options and adjustments (Mouse mode only)

1. Make sure the joystick is in Mouse mode.
2. Press and hold the middle button until you hear a beep.

• While in Learn Mode, briefly press the middle button.
• Each press changes the speed.
• There are 4 speed levels.

• Press the left button in Learn Mode.
• 1 beep = right‑handed
• 2 beeps = left‑handed

• Press the right button in Learn Mode.
• 1 beep = right‑click
• 2 beeps = double‑click

• Press and hold the middle button until you hear a beep.
• The joystick exits Learn Mode and saves the settings.

8. Compatibility and connections

• Windows PCs
• Macs
• Chromebooks
• iPads and iPhones (with a suitable adapter)
• Some Android devices (with an adapter)

• PCs
• Xbox Adaptive Controller

9. Battery charging

• The joystick has a built‑in rechargeable lithium‑ion battery.
• When the battery is low, the LED flashes red every few seconds.

1. Plug the mini‑USB end into the joystick.
2. Plug the USB end into a computer or USB charger.
3. The LED lights green while charging.
4. The LED turns off when fully charged.

10. Mounting the it-Stick

We supply two mounting plates for the it-Stick Joystick:

Manfrotto Medium Triangular Mounting Plate (7393)

REHAdapt Medium Triangular Mounting Plate (6409)

The following image shows which arms are compatible with each plate:

11. Troubleshooting

12. Downloadable resources

• Product manual

13. Warranty

If any part of this article was unclear, or you think there is something missing (e.g. extra steps, examples or images), let us know and we'll update the article:
Support article feedback form