Inclusive ClassMate PC (Assembly)

The PC and touchscreen components arrive in three boxes:

1. Touchscreen monitor
2. Small Form Factor (SFF) PC
3. VESA PC cage

Unpack each item and put the packaging to one side. You should have the following items:

1. Touchscreen monitor
2. Power cable for monitor
3. Small Form Factor PC
4. Power block for PC
5. HDMI cable
6. USB cable
7. VESA cage (including four securing screws)
8. Keyboard and mouse

Assembly instructions:

1.  Attach the VESA cage to the back of the monitor, making sure the slot for the PC is facing upwards. Secure the cage to the back of the monitor (using the four screws supplied with the cage).

2.  Once the cage is fitted, slide the PC into the cage (as shown below) and secure it using the thumbscrew on the rear of the cage (circled red).

3.  If you’re going to use Wi-Fi, screw the antenna into position. 

4.  You can now connect the HDMI and USB cables to the monitor and PC. 

5.  Next, connect the power block to the PC and the power cable to the monitor

6.  Next, attach the REHAdapt VESA mount to the PC cage. making sure the circular hole is positioned top left, as show below.

7.  You can now slot the PC and monitor onto the REHAdapt Floor Stand (see separate instructions).

If you would like to download a copy of these instructions to print out, you can do so here:  classmate_assembly_instructions.pdf