Buddy Button IC
by Ablenet
Adam
Last Update 20 days ago
Overview
The Buddy Button IC has a 65mm activation surface that requires approximately 200g of force to activate. This updated version of the Buddy Button features interchangeable switch caps in 5 different colours, making it easy to customise for individual preferences or settings.
Switch Specifications
| Activation force | 217g |
| Mounting options | See mounting section below |
| Activation area | 65mm |
| Auditory feedback | Click on activation |
| Tactile feedback | Yes |
| Visual feedback | No |
| Termination: | 3.5mm mono, right-angled |
| Cable length | 150cm |
| Switch type | Push to make (Normally Open) |
| Battery | None |
| Activation range | N/A |
Mounting the Buddy Button IC
We supply two mounting plates for the Big Buddy Button Red:
Buddy Button Mounting Plate (for Manfrotto Arms) - 10081
Buddy/Specs Adapter (for REHAdapt and Manfrotto Arms) - 6411
The following image shows which arms are compatible with each plate:
All these arms include a Super Clamp.
Getting started with the Buddy Button IC
The video below offers an introduction and overview of how to use the Buddy Button IC Switch. It will guide you through initial setup, including how to change the interchangeable switch top to allow you to customize your switch.
First time use
- Place a colored Switch Cap on top of the black switch base.
- Gently push down on the switch cap and turn it clockwise until you hear it click.
- The switch cap will not beable to spin in either direction once it is correctly locked in place.
- Plug Buddy Button IC switch into any switch adapted device with a standard, mono 3.5mm switch jack.
- Once the activation area is pressed, any attached device will activate.
Using switches with Inclusive Technology software
Warranty