LITTLE Step-by-Step

Overview

The LITTLE Step-by-Step communicator from Ablenet allows users to record and play back a series of messages in order. It has the same 65mm activation area as the LITTLEmackmack, but with added functionality for sequencing communication and activities.

Who's it for?

This device may be helpful for:

• Learners beginning to use voice output
• Children and adults who benefit from predictable, sequential messages
• Classroom activities (songs, stories, turn-taking)
• Cause-and-effect communication
• Users who access with a built-in or external switch

If positioning or access is difficult, seek advice from a therapist or assistive technology professional.

Setting up (step-by-step)

1. Turn the device on

• Turn the On/Off–Volume control clockwise
• Increase volume slightly so you can hear recordings clearly

2. Choose a Level

• Use the Levels switch on the side
• There are three Levels, each with its own set of messages

3. Record messages

1. Press and hold the Record button until the recording light turns on
2. Press and hold the switch top
3. Speak clearly into the microphone after the beep
4. Release the switch top to finish that message
5. Repeat for additional messages
6. Press the Record button once to exit record mode

Using the product

Playing messages

• Each press of the switch plays the next recorded message
• After the last message, it loops back to the first

Using Levels

• Each Level stores a separate message sequence
• Move the Levels switch to choose which set is active

Example:

• Level 1: Morning routine steps
• Level 2: Story page prompts
• Level 3: Song lines

Getting started video

Advanced features video

Battery Advice

Ablenet recommend using good quality, disposable (non-rechargeable) alkaline batteries in their communication aids.

A new PP3 battery provides approximately 9 volts, which decreases over time. When the output drops to 6.8v the device will start to misbehave.

The symptoms of a failing battery include:

• Record light flashing yellow when the top switch is pressed (with no sound output)
• Messages cutting out part way through playback

The device will continue to behave in this way until the voltage drops below 6v (at which point it will shut down completely).

Mounting the LITTLE Step-by-Step

The LITTLE Step-by-Step requires the requires the REHAdapt Rectangular Mounting Plate and is compatible with the REHAdapt Mounting Arms.

Warranty

The LITTLE Step-by-Step has a two year warranty. If you experience any issues, please email [email protected].

You can find detailed support information for the LITTLE Step-by-Step on the manufacturer's website, here:

https://support.ablenetinc.com/category/assistive-technology/speech-devices/little-step-by-step/

If any part of this article was unclear, or you think there is something missing (extra steps, examples or images etc.), let us know and we'll update the article:
Support article feedback form